Let this Machine take care of your GMP concerns!

Capsule filling at up to 25,000 capsules per hour

·        By maximizing filling speeds and ensuring fill weight accuracy, the Model 10's proven design has resulted in faster production and more accurate filling.

·        The machine has a below bed capsule closing station which provides protection to the operator while ensuring no product loss.

·        Operators may sit or stand while operating the machine, thereby greatly reducing fatigue and increasing operator efficiency.

·        The machine is manufactured from stainless steel and aluminum, with durable polycarbonate and stainless steel guarding which makes the machine exceptionally easy to clean while maintaining cGMP.

·        Specifically engineered size change components ensure that change-over times are kept to a minimum.

·        Precise rectification speed and accurately controlled drive tables ensure the correct delivery of capsules to the filling ring and to the powder delivery system.

Capacity	18,000 to 25,000 capsules per hour for sizes 00 through 4 dependent upon volume per ring, operator experience and filling conditions (see Room Conditions below).
Room Conditions	Temperature 72° to 80°F with relative humidity between 35% and 55%
Construction	A full stainless steel framework and bed section with polycarbonate guarding to all moving parts
Electrical supply	208,230, or 440V, 3 Phase
Electric Motors	Rating (HP)	AC/DC	Location
	0.25	DC	Under rectifier assembly
	0.50	DC	Above hopper assembly
	0.25	DC	Under fill table assembly
	1.50	AC	Vacuum pump drive (3-phase) access from rear of machine
Compressed Air	1.5 cubic feet per minute at 30 to 40 psi
Overall Dimensions	Height	1929 mm		72 in
	Width	1220 mm		48 in
	Depth	762 mm		30 in
	Weight (approx)	454 kg		1000 lbs
	Floor Area Required	3.34 sq meters		36 sq ft